Appendix 27
10 Appendix
10.1 Antenna connector
The radio connection is established via the antenna mounted to the antenna
connector. The radio module inside could be damaged by electrostatic
discharge via the open connector. We recommend using the originally
supplied antenna only.
10.2 Specifications
Electrical data
Temperature range: -20 to +50° C (-4 to +122° F)
Torque: 0.25 Nm (0.3 Nm peak)
Speed: 240 teeth/s (6 R/s)
(all with gear m0.8, 40t)
Supply voltage: 10.5 - 34 V
Power consumption: max. 2 - 6 A
To Next Page
Loading...
