Artesyn ATCA-7480 - Sensor Device Commands; Table 8-6 Supported Sensor Device Commands

To Next Page

To Previous Page

Supported IPMI Commands

ATCA-7480 Installation and Use (6806800T17A)

232

8.1.6 Sensor Device Commands

Table 8-6 Supported Sensor Device Commands

Command

NetFn

(Request/Response) CMD Comments

Get Device SDR Info 0x04/0x05 0x20 -

Get Device SDR 0x04/0x05 0x21 -

Reserve Device SDR Repository 0x04/0x05 0x22 -

Get Sensor Reading Factors 0x04/0x05 0x23 -

Set Sensor Hysteresis 0x04/0x05 0x24 -

Get Sensor Hysteresis 0x04/0x05 0x25 -

Set Sensor Threshold 0x04/0x05 0x26 Most of the threshold-based

sensors have fixed thresholds.

Before using this command,

check whether threshold

setting is supported by using

the Get Device SDR command.

Get Sensor Threshold 0x04/0x05 0x27 -

Set Sensor Event Enable 0x04/0x05 0x28 -

Get Sensor Event Enable 0x04/0x05 0x29 -

Get Sensor Event Status 0x04/0x05 0x2B -

Get Sensor Reading 0x04/0x05 0x2D -

Get Sensor Type 0x04/0x05 0x2F -

Set Event Receiver 0x04/0x05 0x00 -

Get Event Receiver 0x04/0x05 0x01 -

Platform Event 0x04/0x05 0x02 -