Universal DrillSaw Battery Charger User’s Guide
DFU-0256-1 Rev. 0 Page 3 of 35
NOTE: This identifies information and training that can simplify the setup and operation of this
device.
1. Read this User’s Guide thoroughly before operating the device and save it for
future reference. For additional information and training, contact your local
Arthrex representative.
2. The AR-400UBC charger incorporates a universal AC input power supply. A
voltage selection switch is not required.
3. AR-400UBC has been designed to accept EMC from other devices within the
limitations as described in section 13.0
To Next Page
Loading...
Need help?
General
