INSTALLATION ON WINDOWS
RECOMMEND: Remove any existing tablet drivers before installing the ARTISUL driver. This includes any
pen tablet driver from other manufacturers. This is to ensure your driver’s performance will not be affected.
Please run setup as administrator.
1. Download the driver from https://artisul.com/downloads/
.
2. Decompress the driver file and run SETUP.EXE.
3. When installing the driver, follow the installation instructions on your screen. Press Ok.
4. After the installation has completed, reboot your computer.
5. After you have finished the driver installation and restarted your computer. If the device has been
successfully installed, you will see a small ARTISUL icon appear in the system tray, which is
normally located at the lower right-hand corner of the screen.
To Next Page
Loading...
