3.1.3.3. ARP|Seq (Arpeggiator/Sequencer)
The Arpeggiator generates notes based on the keys you have pressed and plays them back
according to the settings of the Pattern buttons and the Oct | Mod range button.
The Sequencer [p.72] and the Arpeggiator [p.67] share several features. We will focus on
those features in later chapters.
Arp | Seq lets you toggle between the Arpeggiator or the Sequencer.
Oct | Mod sets the range for the Arpeggiator. When the Sequencer is active, it enables you to
select one of four sequencer modulation tracks.
The Rate knob sets the BPM (speed). When you press it, the Sync LED will light up to indicate
that Sync is activated. The Rate knob modifies the Time Division, based on the previously set
BPM (1/4th, 1/8th, ...)
The Arpeggiator and the Sequencers
15 Arturia - User Manual MicroFreak - MicroFreak Overview
To Next Page
Loading...
