4.3. Tweaking the Preset Configurations
In Utility, you'll find settings that you can use to change the standard configuration of the
current preset. These settings are saved with the preset. That means that each preset can be
made to behave uniquely; one preset can be paraphonic, respond to pressure, and have a
sequence length of five; another sequence can be monophonic and have a sequence length
of 32.
Note: The two sequences that are part of each preset will always have the same length.
Changing these settings can make all the difference. For example, you've created a
sequence and used one of the modulation tracks to add a varying amount of glide to some
of the steps. By changing some of the Utility>Preset settings, you can explore alternative
options:
• What difference does it make when I change the Glide setting from Time to
Rate? Utility>Preset>Glide Mode
• Does Resetting the Envelope make the sequence snappier?
Utility>Preset>Envelope reset
• Will changing the sequence smooth settings create a different mood?
Utility>Preset>Seq (1-4) smooth
Arturia - User Manual MicroFreak - The MicroFreak Presets 24
To Next Page
Loading...
