The following parameters are saved with the Preset:
Note: The last two columns show whether the parameter can be edited in Utility and/or the
MIDI Control Center.
x = available
0 = not available
Category Parameter Description Utility MCC
Preset
Saved with Preset
Preset Volume
[-12 to +12]
Relative preset volume x 0
Bend Range [0 …
24]
From zero to two octaves x 0
LFO retrig [OFF,
ON, Legato]
Retrigger mode: retrig off, retrig when receiving
keyboard trigger, no trig when playing legato
x 0
Envelope legato
[OFF, ON]
Envelope legato On, OFF x 0
Press mode
[Aftertouch,
Velocity]
Selects Pressure mode x 0
Velo amp mode
[0 … 10]
Sets how much velocity affects volume output x 0
Glide mode
[Time, Sync, Rate]
Set either a time-based, a synced or a rate-based glide
effect
x 0
Seq Length [4 …
64]
Set sequence length x 0
Default gate
length [5 … 85]
Sets the length of gates output by the arp/seq when
Spice is at 0. Dice and Spice modify this length
x 0
Seq 1 smooth
[OFF, ON]
Set sequence smoothing for sequencer MOD track 1 x 0
Seq 2 smooth
[OFF, ON]
Set sequence smoothing for sequencer MOD track 2 x 0
Seq 3 smooth
[OFF, ON]
Set sequence smoothing for sequencer MOD track 3 x 0
Seq 4 smooth
[OFF, ON]
Set sequence smoothing for sequencer MOD track 4 x 0
25 Arturia - User Manual MicroFreak - The MicroFreak Presets
To Next Page
Loading...
