Possible modulation destinations:
Parameter Description
Glide modulates Glide amount
Oscillator Type modulates oscillator type
Oscillator Wave modulates the wave of the currently selected oscillator
Oscillator Timbre modulates the timbre of the currently selected oscillator
Oscillator Shape modulates the shape of the currently selected oscillator
Filter Cutoff modulates the cutoff frequency of the Filter
Filter Resonance modulates the bandwidth of the Filter
Envelope ATTACK modulates the attack stage of the Standard envelope
Envelope DECAY modulates the decay stage of the Standard envelope
Envelope SUSTAIN modulates the sustain stage of the Standard envelope
Envelope FILTER AMOUNT modulates the amount of signal send from Envelope to AMP
LFO RATE modulates LFO rate
Arp&Seq RATE modulates Arp&Seq RATE
CYCLING Envelope RISE modulates the rise stage of the Cycling Envelope
CYCLING Envelope FALL modulates the fall stage of the Cycling Envelope
CYCLING Envelope HOLD modulates the hold stage of the Cycling Envelope
CYCLING Envelope AMOUNT amount of CycEnv send to the Matrix
Matrix Modulation Amount Sets the modulation amount of a Matrix point
This last option deserves a bit more explanation:
Once you've setup a modulation point in the Matrix you can modulate the intensity of
the modulation happening at the point with another source. Yes, you're modulating a
modulation!
An example: you've setup the LFO to modulate the frequency of the oscillator. In other words
you've created vibrato. How do you modulate the intensity of this vibrato?
• Use the encoder to move to the intersection point CyEnv>Assign1 on the Matrix
• Press and hold the Assign1 button. The display will invite you to move to a
destination point you want to modulate
• Move to the LFO>Pitch point where you already created the vibrato modulation
◦ Press the encoder. The destination is now fixed. Move back to the
Pitch>Assign1 point and press the encoder. The values you enter now
will cause the Cycling Envelope to modulate vibrato depth. Select
whatever freaky setting suits you. Experiment with changing the
settings of the Cycling Envelope.
Note: In paraphonic mode all voices will be assigned simultaneously as a destination.
Arturia - User Manual MicroFreak - Making Connections 32
To Next Page
Loading...
