Aruba Instant On 1930 Installation, Safety, And Regulatory Information

CAUTION: Only Aruba-approved power cords may be used with Aruba devices. To access the power
cord information for your switch, see the latest edition of the Aruba Instant On 1930 Switches Installation
and Getting Started Guide. Lost or damaged power cords must be replaced only with Aruba-approved
power cords. If your installation requires a dierent power cord than the one supplied with the switch
and/or power supply, be sure that the cord is adequately sized for the current requirements of the
switch. In addition, be sure to use a power cord displaying the mark of the safety agency that denes
the regulations for power cords in your country/region. The mark is your assurance that the power cord
can be used safely with the switch and power supply.
WARNING: Do not use a damaged or nonrecommended power cord with your switch. Using such
power cords voids the switch and power supply warranty. It can also cause serious electrical problems,
including injury or death to personnel, and damage to the switch and other property. If you cannot
verify that you have a power cord approved for use with your switch model, contact your authorized
Aruba dealer or sales representative for assistance.
WARNING: Remove the power cord from the switch before mounting or dismounting the switch.
Environmental specications
Table 1: Environmental specications for all 1930 switch models
Requirement Value
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative humidity 15% to 95%
Non-operating temperature -40°F to 158°F (-40°C to 70°C) up to 15000 ft
Storage relative humidity 15% to 95%
Max operating altitude 10000 feet (3 km) Max
Max non-operating altitude 15000 feet (4.6 km) Max
Switch Dimensions (L x W x H) Weight
Aruba Instant On 1930 8G 2SFP Switch
(JL680A)
6.4" x 9.9" x 1.72"
(16.2 x 25.35 x 4.35 cm)
2.60 lb
(1.18 kg)
Aruba Instant On 1930 8G Class4 PoE 2SFP
124W Switch (JL681A)
10.12" x 9.9" x 1.72"
(25.7 x 25.35 x 4.35 cm)
4.17 lb
(1.89 kg)
Aruba Instant On 1930 24G 4SFP/SFP+ Switch
(JL682A)
8.94" x 17.43" x 1.72"
(22.7 x 44.25 x 4.35 cm)
5.35 lb
(2.43 kg)
Aruba Instant On 1930 24G Class4 PoE
4SFP/SFP+ 195W Switch (JL683A)
10.56" x 17.43" x 1.72"
(26.8 x 44.25 x 4.35 cm)
7.65 lb
(3.47 kg)
Aruba Instant On 1930 24G Class4 PoE
4SFP/SFP+ 370W Switch (JL684A)
10.56" x 17.43" x 1.72"
(26.8 x 44.25 x 4.35 cm)
8.10 lb
(3.67 kg)
Table Continued
Page 4

Aruba Instant On 1930 Specifications

General

Model	Aruba Instant On 1930
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Uplink Ports	2 or 4 SFP/SFP+ ports
Management	Aruba Instant On cloud-based management
Layer 2 Features	VLAN, QoS, LACP, IGMP snooping, STP/RSTP/MSTP
Layer 3 Features	Static Routing
Power Supply	Internal (100-240V AC)
Certifications	RoHS