Arylic A50 User Manual

8
8.2.2 Option 2 - Connection via LAN
1. Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10 seconds. (Note:
the cell phone and the device must be in the same network)
*Attention for Android users
Different brand mobile phones may ask you to allow to use SoundSystem WiFi network ,please choose
yes, if not ,you may not able to set up successfully .
8.2.3 Option 3 - Bluetooth pair
1. Open the 4STREAM app.
2. Choose the Bluetooth mode at the bottom of the music source page of 4STREAM app.(to activate the
Bluetooth).
3. Open the Bluetooth on the mobile device.
4. Pair to device Bluetooth “SoundSystem”.

Arylic A50 Specifications

General

Frequency Response	20Hz-20kHz
Amplifier Type	Class D
Wireless	Yes
WiFi	802.11 b/g/n
Bluetooth Version	5.0
Supported Codecs	SBC, AAC
Impedance	4-8Ω
Connectivity	WiFi, Bluetooth, Ethernet
Audio Formats	MP3, WAV, FLAC, AAC, ALAC, APE
Ethernet	10/100M
THD+N	0.03%
Streaming Protocols	AirPlay, DLNA, UPnP, Spotify Connect
Audio Input	USB
Audio Output	Speaker terminals
Input Impedance	47kΩ
Bluetooth Range	10m