
Do you have a question about the Arylic B50 and is the answer not in the manual?
| Amplifier Type | Class D |
|---|---|
| Input Impedance | 47kΩ |
| Bluetooth Version | 5.0 |
| WiFi | Yes, 2.4G IEEE 802.11 b/g/n |
| Bluetooth Codec | SBC, AAC |
| Frequency Response | 20Hz-20kHz |
| Streaming Protocols | Spotify Connect, Airplay, DLNA |
| Audio Inputs | RCA, Optical |
| Audio Outputs | Subwoofer out |
| Bluetooth Range | 10m |
| Power Supply | 24V/4.16A |
| Wireless | 2.4G WiFi, IEEE 802.11 b/g/n |
Details the power switch, IR sensor, status LEDs, and volume knob on the front panel.
Describes all input/output connectors on the rear of the device, including power and audio.
Instructions for connecting passive speakers using speaker cables.
How to connect a turntable to the Phono input and GND connector.
Connect mobile devices to B50 as a Bluetooth receiver.
Transmit audio wirelessly from B50 to Bluetooth speakers or headphones.