TD 92232GB
2005-06-15 / Ver.G
Installation Guide
ELISE2
10
4.2 Wiring Runs
The plastic partition is scored to facilitate breaking at convenient intervals.
1 Use pliers to break off a suitable section.
2 Run the wiring out through the partition. Wiring can be run three ways from the
ELISE2 module:
• Remove the rectangular covers and run the cabling out through the side (1).
• Break off sections at short side of case and run the cabling downwards (2).
• Run the cabling through the round holes at the bottom of the case (3).
3 Secure the wiring with cable straps.
009
2
1
2
3
1
3
010
To Next Page
Loading...
