TD 92232GB
2005-06-15 / Ver.G
Installation Guide
ELISE2
1
1 Introduction
The ELISE2 module can be used as a platform for a wide range of applications. The
module can be used as an interface between systems, for example a TCP/IP network and
the System 900 bus.
The licence is application dependent and therefore described in the application
documentation.
The parameter setup of ELISE2 is done with a web browser.
Figure 1. The ELISE2 module.
Supply voltage: 12 – 24 V/DC ±10%
Current consumption: max 0.4 A at 12 V
max 0.2 A at 24 V
Delivery includes: ELISE2
System Bus Cabling
Ethernet cable
Tools etc. required: Screwdriver
Cutting pliers
Screws for installation
Multimeter
Power supply
PC with Microsoft Internet Explorer 5.5 or later
Software "Route to ELISE". (Available from the
distributor)
001
To Next Page
Loading...
