FI
ES
IT
DE
SE
12
• For a predefined period of time (default 10 minutes) if the
Mute button is pressed during the alert signal.
Activate/Deactivate the Man-down and/or No-movement
Alarm
Enter “Settings” , and step to “Alarm”. Then select the
wanted alarm(s) and press Back repeatedly.
The corresponding icon(s) appear on the display.
Follow the same steps to deactivate the alarm(s).
Cancel Man-down and No-movement Alarm
Press the soft key ”OK” to confirm ”Man-down warning.
Cancel?” or ”No-movement warning. Cancel?” which appears in
the display during the alert signal or press any key.
Delay Man-down and No-movement Alarm Temporarily
Press the Mute button during the alert signal and then press
”Yes” to confirm the message ”Delay MD/NM detection?”.
The corresponding display icon will keep flashing until the alarm
is active again (default 10 minutes).
Reset Alarm
To reset the alarm function after an alarm has been sent:
• Move the handset to an upright position (after Man-down).
• Move the handset (after No-movement).
• Press the Mute button if the Acoustic Location Signal is
sounding.
To Next Page
Loading...
