EasyManua.ls Logo

ASCOM I62 - Environmental Requirements; Handset; Chemical Resistance; Battery

ASCOM I62
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FI
ES
IT
DE
SE
18
Handset
Only use the handset in temperatures between
-5 °C and +45 °C (23 °F and 113 °F).
Avoid exposing the handset for direct sunlight or close to
other heat sources.
Do not expose the handset to open flame.
Keep the handset away from excessive heat and moisture.
Avoid sudden temperature changes to prevent condensation
in the handset. It is recommended to put the handset into an
air tight plastic bag until the temperature is adjusted, for
example, when entering or leaving a cold/heated building on a
warm/cold day.
Protect your handset from aggressive liquids and vapours.
If the handset has been exposed for water or condense,
remove the battery immediately and let it dry completely
before re-inserting the battery.
Keep the handset away from strong electromagnetic fields.
Do not place a cold handset in a charger.
Chemical Resistance
The alpha and numeric characters printed on the exterior of the
handset have been tested and found resistant to chipping,
fading or wearing off when the handset is treated with common
cleaners and disinfectants or perspiration. The following
chemicals have shown no harmful effect:
3 % Hydrochloric Acid
M-alcohol (70 % Methylated Ethanol)
60 % Chlorhexidine 0.5 mg/ml
Acetone can be damaging to the plastic casing of the handset
and should not be used.
Battery
Do not immerse the battery into water. This could short-circuit
and damage the battery.
Do not expose a battery to an open flame. This could cause the
battery to explode.
Do not allow the metal contacts on the battery to touch
another metal object. This could short-circuit and damage the
battery.
Environmental Requirements

Other manuals for ASCOM I62

Related product manuals