Need help?Do you have a question about the ASCOM IP-DECT IPBS2 and is the answer not in the manual?
General| Technology | DECT |
|---|---|
| Protocol | SIP |
| Connectivity | Ethernet |
| Number of DECT Handsets | Up to 8 |
| Network Interface | 10/100 Mbps Ethernet |
| Operating Range | Up to 300m outdoors, 50m indoors |
| Type | IP-DECT Base Station |
| Compatibility | Ascom handsets |
| Power Supply | Power over Ethernet (PoE) |
| Frequency Band | 1880-1900 MHz |
| Encryption | DECT Standard Authentication and Encryption |
| Operating Temperature | 0°C to +40°C |
| Storage Temperature | -20°C to +70°C |
| Humidity | Up to 95% non-condensing |
Describes the IPBS1 base station, including versions and overview.
Describes the IPBS2 base station, including versions and overview.
Describes the IPBL gateway, its versions and overview.
Describes the BS3x0 base station, including versions and overview.
Describes the DB1 base station, including versions and overview.
Explains cabling requirements for base stations.
Covers physical mounting of base stations.
Details wall mounting bracket installation.
Steps to connect base station cables.
Final mounting step for base stations.
Explains various methods to power the base station.
Explains PoE powering for IPBS.
Explains EPP powering for BS3x0/DB1.
To Next Page
