TD 92989EN
15 October 2014 / Ver. B
Installation Guide
IP-DECT Base Station & IP-DECT Gateway
4
2.1.2 IPBS1 with External Antennas
The IPBS1 is available with two omni-directional external antennas. Other external
antennas can be mounted as well. This section contains the differences between the IPBS1
with internal and external antennas. For all other information see 2.1.1 IPBS1 with Internal
Antenna on page 2.
Contents of the Box
The box in which the IPBS1 is packed contains:
• An IPBS1 for external antennas
• Two antennas
• A mounting bracket
• Two screws with wall plugs
NOTE: The IPBS1 cannot be mounted with the antennas pointing downwards as the
mounting bracket does not support it.
Insert the antennas into the IPBS1 before following the installation instructions in
3.2 Install the Base Station on page 18.
To Next Page
Loading...
Need help?
General
