Description
INSTALLATION GUIDE
IP-DECT Base Station and IP-DECT Gateway
Flashing fast green Firmware update or clear config after long reset.
Steady green Status OK, system is fully operational.
Steady red Status Fail, system error condition.
Steady amber System is in TFTP server mode.
Base station LED
Description
Not lit No U
PN
link established.
Flashing U
PN
link established (activated state), RFP is not
operational.
Steady RFP is fully initialised and operational.
Base station LED
Description
Not lit No speech activity in RFP.
Flashing All speech channels occupied in RFP.
Steady Speech activity in RFP.
Sync/Ref sync LED
Description
Not lit No sync communication established.
Steady Communication established.
Sync/Ref sync LED
Description
Not lit Sync port not selected as input sync source.
Flashing Sync port selected as input sync source but the
sync signal is not in sync.
Steady Sync port selected as input sync source and the
sync signal is in sync.
Lan LED
Description
Not lit No link.
Flashing Link present and network activity.
Steady Link present, but no network activity.
Lan LED
Description
Not lit 10 Mbps operation.
Steady 100 Mbps operation.
9
TD 92989EN / 25 January 2021 / Ver. E
To Next Page
Loading...
Need help?
General
