Ascon tecnologic e31 Series User Manual

Ascon Tecnologic - e31- - OPERATING INSTRUCTIONS - PAG. 9
6. ACCESSORIES
6.1 Parameters configuration by A01
The instrument is equipped with a connector that allows the
transfer from and toward the instrument of the functioning pa-
rameters through the device A01 with 5 poles connector.
This device it is mainly usable for the serial programming of
some instruments which need to have the same parameters
configuration or to keep a copy of the parameters setting of an
instrument and allow its rapid retransmission.
The same device allows to connect a PC via USB with which,
through the appropriate configuration software for “AT Univer-
salConf tools”, the operating parameters can be configured.
To use the device A01 it is necessary that the device or instru-
ment are being supplied directly or through the key.
AC supply
Supply adapter
12 VDC
Power supply
Enter
PWS 12 V
A B C
TTL
+-
USB to PC
USB
Enter
PWS 12 V
A B C
TTL
+-
USB to PC
USB
For additional info, please have a look at the A01 instruction
manual.
6.2 Parameters configuration by AFC1
The AFC1 is a contactless NFC (Near Field Communica-
tions) connection device that allows to Upload/Daownload
the operating parameters From/To the instruments.
The AFC1 is powered directly by the USB port through
which is connected to a PC.
When the instrument is equipped with the NFC communica-
tion option, the parameter configuration performed with the
“AT UniversalConf” program (see previous paragraph) can be
transferred to the instrument also through the AFC1 device.
To load the operating parameters in the instrument using the
AFC1 device, place the instrument on the AFC1 with the dis-
play facing the NFC symbol ( ), then send the parameters
to the instrument’s memory.
USB

Ascon tecnologic e31 Series Specifications

General

Brand	Ascon tecnologic
Model	e31 Series
Category	Controller
Language	English