PAGE 9
EDITING AND SAVING A DRUM KIT
ADJUSTING KIT VOLUME
1. Press the [KIT] or [PAGE] button. Select the Kit Volume page.
2. Press the [–] or [+] button. Adjust the kit volume.
REVERB & EQ CONTROL
1. Press the [KIT] or [PAGE] button. Select the Global Reverb page and EQ pages.
2. Press the [–] or [+] button. Switch Reverb ON or OFF. Set the gain of 3-band EQ
(high, middle, low)
SELECTING THE PAD’S VOICE
1. Press the [VOICE] button. Select the Pad Voice page.
2. Press the [–] or [+] button. Select the drum instrument of the selected pad.
Please refer to Drum Instrument List.
ADJUSTING PAD VOLUME, PAN & PITCH
1. Press the [VOICE] or [PAGE] button. Select the Pad Volume, Pad Pan, and Pad
Pitch pages.
2. Press the [–] or [+] button. Adjust the corresponding parameter.
SETTING PADS TO PLAY SONGS
1. Press the [VOICE] or [PAGE] button. Select the Pad Song and Song Number pages.
2. Press the [–] or [+] button. Switch the Pad Song function ON or OFF. Select the Song
that begins playing when the following pad is struck.
SAVING THE EDITED KIT
1. Press the [SAVE] button. The number of user kit will be flashed.
2. Press the [–] or [+] button. Select a user kit to save your settings. (No. 25-40)
3. Press the [SAVE] button again. Save the setting to the selected user kit.
VOICE
TEMPO
BEAT
To Next Page
Loading...