V2000 – Installation Guide
U-0623-0291.docx – Issue: 04 complete, approved
Page 28 of 40
⑤
ETH1 and ETH2: 100BASE-T Ethernet Ports
Standard RJ45 jack
Pin CAT5 Cable
(EIA 568-B)
Signal Description
1 white/orange
TRANSMIT+
100BASE-T Ethernet Transmitted Data
2 orange TRANSMIT- Same as above
3 white/green RECEIVE+ 100BASE-T Ethernet Received Data
4 blue – Not used
5 white/blue – Not used
6 green RECEIVE- Same as above
7 white/brown – Not used
8 brown – Not used
Cabling
Type Standard LAN cable
Termination RJ45
Suggested Type CAT5 E
⑥
USB Port (for future use)
USB Micro-AB socket
Pin Signal Description
1
VBUS + V Supply (output)
2
D−
Data-
3
D+ Data+
4
ID
Permits distinction of host connection from slave connection:
• Host: connected to Signal ground
• Slave: not connected
5
GND Signal ground
Cabling
Type Micro USB OTG serial data cable
Termination USB Micro-AB
Suggested Type As required to connect to the external device being used
To Next Page
Loading...
