ASL INTERCOM V2000 User Manual

ASL Document Ref.: U-0623-0383.docx
Issue: 05 complete, approved - Date: 17/12/15
V2000
Modular Amplifier Mainframe
User’s Manual
(LSZDC and V2000-STBY Interface Cards shown as example.)
(Silver front panel with silver annotation on a black background / black annotation on a silver background)
Sold in Australia by
Morrison's Public Address
Phone 0407442822
Emal: Sales@morrisonsav.com.au

ASL INTERCOM V2000 Specifications

General

Brand	ASL INTERCOM
Model	V2000
Category	Amplifier
Language	English

Summary

Introduction

Safety and Precautions

Environmental Safety

Guidelines for ventilation, temperature, humidity, and avoiding corrosive environments.

Weight Safety

Instructions for safely lifting and handling the V2000 mainframe and its components.

ESD Precautions

Advises on handling static-sensitive V2000 components to prevent damage.

Battery Handling

Safety procedures for working with batteries, including qualified personnel and insulated tools.

Electrical Safety

Details electrical safety measures, power cabling, earthing, and hazardous terminals.

Fire and Burn Safety

Warnings about high currents from batteries and potential high case temperatures.

Ground Loops and Disposal

Explains ground loops and guidance on blanking plate disposal.

V2000 Controls and Indication

Front View Controls and Indicators

Describes the LEDs and controls on the front panel of the V2000 mainframe.

Rear View Connections

Details the various input/output ports and connectors on the rear panel of the V2000.

Requirements

Documentation and Hardware

Lists required documents and hardware components for the V2000 system.

Power-Up Procedures

Instructions for powering up the V2000 using MAINS and BATTERY supplies.

VIPEDIA-12 and PC Configuration

Details VIPEDIA-12 setup and PC requirements for system configuration.

V2000 IP Address Configuration

V2000 Power Up for IP Setup

Steps for powering up the V2000 unit for initial IP configuration.

ASL Transfer Tool for IP Configuration

Using the ASL Transfer Tool to set the IP address for V2000 units.

PAVA System Configuration

Static and Dynamic Configuration Overview

Describes static configuration using the System Configuration Tool for V2000/VIPEDIA-12.

VIPEDIA-12 Static Configuration

Details static configuration for VIPEDIA-12 using the System Configuration Tool.

V2000 Static Configuration

Step-by-step guide to configuring V2000 static settings in the PAVA system.

V2000 Frame and Amplifier Slot Configuration

Configuring V2000 frame settings and amplifier slots (working/standby).

System Static Configuration Upload

Uploading the static configuration file to all PAVA devices using the ASL Transfer Tool.

VIPEDIA-12 Dynamic Commissioning

Audio Output Commissioning

Configuring output limiter and clipper on VIPEDIA-12 for V2000 compatibility.

Surveillance Generator Commissioning

Commissioning a 20Hz surveillance tone from VIPEDIA-12 outputs for V2000 input surveillance.

V2000 Dynamic Commissioning

V2000 System Surveillance Overview

Explains different types of surveillance for V2000 (Input, Amplifier Output, Loudspeaker).

Surveillance Tone Types

Details the tones used for surveillance and their configuration sources.

V2000 System Surveillance Commissioning

Commissioning surveillance features like Input and Amplifier Output using the V2000 tool.

Specific Surveillance Commissioning

Steps for Input, Amplifier Output, DC-EOL, and Earth Leakage surveillance.

Surveillance Commissioning Example and Backup

Example readings and procedure to backup dynamic configurations.

Audio Settings

Gain, Gate, and Equaliser Settings

Adjusting output level, input noise gate, and the 10-band equaliser for each slot.

Induction Loop EQ Configuration

Specific EQ settings for configuring a V2000 output for an ASL ILP01 induction loop.

VIPEDIA-12 Fault Codes for V2000

V2000 Amplifier Slot Faults

Troubleshooting Guide

Communication and Software Troubleshooting

Resolving issues with ASL software communication, RS485, and File Transfer Tool.

V2000 Configuration, Wiring, and Power Issues

Troubleshooting dynamic tool, clearing config, wiring, and power issues.

Firmware

V2000 Hardware Firmware Versions

Details the firmware components for the V2000 mainframe and surveillance cards.

Firmware Update Procedures

Refers to the ASL document for updating V2000 Host and LSZDC DSP firmware.

PC Requirements

Maintenance

Firmware Version and Battery Health Checks

Checking firmware versions and measuring battery resistance for system maintenance.

Visual Inspection and Component Replacement

Performing visual checks and guidance on replacing V2000 equipment and batteries.