ASL INTERCOM V2000 - Induction Loop EQ Configuration

V2000 User’s Manual
U-0623-0383.docx – Issue: 05 complete, approved – 17/12/15
Page 26 of 36
7.3.1 Induction loop
Use the following EQ settings when configuring a V2000 output for an ASL ILP01 induction loop:
• Band 1:
Filter = Peak, Frequency = 300Hz, Gain = -2dB, Q = 1
• Band 8:
Filter = Peak, Frequency = 2000Hz, Gain = +1dB, Q = 1
• Band 9:
Filter = HShelf, Frequency = 5000Hz, Gain = +18dB
• Band 10:
Filter = Peak, Frequency = 5000Hz, Gain = +6dB, Q = 1