ASL INTERCOM V2000 - PAVA System Configuration; Static and Dynamic Configuration Overview

V2000 User’s Manual
U-0623-0383.docx – Issue: 05 complete, approved – 17/12/15
Page 14 of 36
6 PAVA System Configuration
V2000 and VIPEDIA-12 configuration is split into two sections. Static and Dynamic.
Static:
• It is configured using the System Configuration Tool. Figure 3 shows the tool open on a
V2000 configuration page as example.
• Contains the static configuration for the whole ASL PAVA system (including V2000s), and is
unlikely to change frequently.
• It is saved to a file (.xml format) and uploaded to all V2000’s and VIPEDIA-12’s.
• Defines which V2000 features will be available for dynamic configuration.
Dynamic:
• The dynamic VIPEDIA-12 settings are configured using the VIPEDIA-12 Dynamic
Configuration Tool.
• The dynamic V2000 settings are configured using the V2000 Dynamic Configuration Tool.
• Both tools are launched from the System Configuration Tool or as standalone.
• The dynamic configuration contains the settings for audio and system surveillance that are likely
to be accessed and adjusted quite frequently, especially during the commissioning stage.
• The settings are applied live so that changes can be monitored and fine-tuned.
Figure
3
System Configuration Tool – Example, with V2000 configuration