ASROCK M8 - Page 14

M8
9
English
2.1.1 The Function of A-Command
e A-Command is a multipurpose controller knob which is used to cycle through
various functions.
Controlling A-Command
• Rotate the knob to toggle among main functions or options.
• Press once to conrm your selection.
Powering on the System
Press A-Command to turn on the system power. Wait until the operating system
loads automatically.
Powering o the System
When the OLED shows the M8 Logo / Date and Time, press A-Command and select
"Yes" to turn o the system power.
Before Entering Windows
ere are three main functions before entering the OS.

Aer the logo appears for ten seconds, the screen shows date and time.
e display will go o if you leave it idle for ve minutes.

Toggle on/o the light in the case.

Toggle the time on/o.
If this option is set to on, M8 Logo / Date and Time screens are available. If
this option is set to o, M8 Logo / Date and Time screens are hidden.