ASROCK M8 - Setup Guide

M8
65
English
3. Exit the Registry Editor window and restart the computer.
4. Press  to enter BIOS, then go to  and
change SATA Mode to . Press  to save changes and exit.
5. Enter Windows 8.1/8/7. Windows will discover the new device and install
AHCI drivers automatically.
5.4.2 Setup Guide
Conguring Rapid Start
Step 1
Run ASRock Rapid Start utility from .
Step 2
If you have more than one hard drives in your system, you must select one, then
choose the  desired for your hidden partition and click on . e
system will automatically create a hidden partition according to your settings. If
there are SSD’s installed into your system, it is recommended to create the partition
on the SSD.