Assa Abloy Aperio Series - Recommended Tools; Hardware Specifications

Page 2 of 16 For more information visit website assaabloyesh.com P/N: 3080006.016 Rev1
Recommended Tools
Flathead Drivers — 3/32”, 3/16”
Drill, Drill Bits — 1/16”, 3/16”, 1/2”
Phillips Drivers — P0, P2
Pencil, Wire Stripper, Level, Square, Ruler, Punch, Scissors
Hardware Specifications
Table 1 – Shaft Length
Table 2 – Mounting Screw Length for Various Door Thickness
Door
Thickness
Reader
Mounting
Cut to
approx.
screw
length
Lock
Mounting
Cut to
Approx.
Screw
Length
1/16”
Coupling Nut
and 3” Rod
10/16”
8-32 x 1-3/4”
Break Away
1-1/16”
1/4"
Coupling Nut
and 3” Rod
13/16”
8-32 x 1-3/4”
Break Away
1-1/4”
1/2”
Coupling Nut
and 3” Rod
1-1/16”
8-32 x 1-3/4”
Break Away
1-7/16”
3/4”
Coupling Nut
and 3” Rod
1-5/16”
8-32 x 1-3/4”
Break Away
No Cut
1”
Coupling Nut
and 3” Rod
1-9/16”
8-32 x 2-1/2”
2”
1-1/4”
Coupling Nut
and 3” Rod
1-13/16”
8-32 x 2-1/2”
No Cut
1-1/2”
Coupling Nut
and 3” Rod
2-1/16”
8-32 x 2-3/4”
No Cut
For Technical Support Please call 1-800-810-WIRE
Door Thickness
Shaft Used
1/16” – 1/2”
L1
>1/2” – 1½”
L2
>1½” – 2¼”
L3