14
ENTR™ User Manual
[Manual] illuminated.
[Cfg] blinks.
Note: If the fails
refer to #1
Hold the door shut to avoid opening.
The lock will carry out the
process.
It take's 15-20 seconds to complete.
6
1. Remove the mechanical key from the cylinder.
2. Check that the door was closed properly or if
lock
was interfered.
Open the door using the handle.
Bring the latch as close as possible to
the door frame.
Note: Do not shut the door.
7
Press [Cfg].
The lock will carry out the
process.
8
[OK] blinks once.
2 short beeps
Illuminated turn
Door frame
Latch
Magnet
To Next Page
Loading...
