22
ENTR™ User Manual
5.2 Pairing Touchpad Reader
This procedure is done via the ENTR™ lock. See also: Pairing Remote Control.
Touch the Touchpad Reader screen
with palm or
Press [77] [#].
Blue LED blinking rapidly.
5
Press [Add].
2
Touch ENTR™ lock screen with palm
or for 3 seconds to
1
Numeric illuminated.
Type [PIN Code] [#].
Numeric blink.
3
4
Press [1] to add Touchpad.
Illuminated turn
[OK] blinks for 15 seconds,
for the Touchpad.
5.
To turn the Touchpad Reader ON press [#] for 5 seconds. The reader will perform a
self-test, followed by series of beeps. LED blinks green, red, and Blue.
To Next Page
Loading...
