30
ENTR™ User Manual
• Fix the reader on the baseplate.
• Tighten
screw.
Fixing screw
OPTION 1:
Place on scanner.
Short beep & white LED illuminates.
Swipe over scanner.
Fingerprint authorized: Blue LED blinks and
unlock command is sent.
Fingerprint not authorized: Red LED
illuminates. The device goes to standby.
FAILED
UNLOCK
OPTION 2:
Touch the Fingerprint Touchpad.
Screen prompts for user code.
Enter your code [OK].
Note: In the event, the unlocking fails, ENTR™ will
display an unlock failed’ message.
USER CODE
23:49 03/01
6.5 Unlock the Door
To Next Page
Loading...
