21
ENTR™ User Manual
Select the where the Touchpad Reader will be
mounted.
• the Touchpad Reader baseplate to the wall.
• Use 4 screws and screw anchors, or double sided
adhesive strip.
1. Release lid screw and open the lid.
2. Insert new (2xAA) according to
the "+" "-" signs.
3. Close the lid and the screw.
4. Touch [#] for 5 seconds.
Notes:
• A short beep sound
and
a green [OK] is illuminated
for 2 seconds.
Important: Do not touch the Touchpad
during the self-test procedure and
the
lights are
When need recharging, a red
warning signal will blink rapidly and long
beep will sound during every lock/unlock
4. Touchpad Reader
To Next Page
Loading...
