EasyManua.ls Logo

Assa Abloy Lockwood Selector Series User Manual

Assa Abloy Lockwood Selector Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.assaabloy.co.nz
1
3782EL trouble shooting guide
Lockwood: no worries
®
www.assaabloy.co.nz
Question and Answer IconNeed help?

Do you have a question about the Assa Abloy Lockwood Selector Series and is the answer not in the manual?

Assa Abloy Lockwood Selector Series Specifications

General IconGeneral
CategoryDoor Locks
ManufacturerAssa Abloy
TypeMortice Lock
BrandAssa Abloy
SeriesSelector Series
Keying OptionsMaster Keying
Compliance StandardsAS4145.2-2008
FinishVarious finishes available

Summary

Introduction

Lock is not-responding

Lock powered but not responding

Troubleshoot lock not responding when heartbeat LED flashes, checking wiring and voltage.

Lock not powered

Troubleshoot lock not powered by checking USB power and door cable voltage.

Lock powered via USB, cabling correct

Check setting switches if lock powered via USB and cabling has correct power.

Wiring for 3-Wire Control

2-Wire Control

Control Diagrams

Lock not locking as per switches

Lock remains powered

Double access setup issues

Lock single beeps every 2 seconds

Lock beeps on lock

Lock beeps on start up

Lock double beeps every 6 seconds

Deadlatch monitor not working

REX not working

Door position switch not working

Lock status monitor not working

LED is not active

LEDs turn off after 10 seconds

LED not visible after fitting furniture

LED signal behavior

Cable space in timber door

USB cable power usage

Re-using old LED furniture

Interchangeability with 3582EL

Retro-fit LEDs and wiring

Powering lock for LED setup

Locking one side without cabling

Related product manuals