80-9352-0020-020 Rev 2 06/23
5200 Series Full Feature Low Energy Operator
Model 5231 (Push Side)
Installation Instructions
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
This product can expose you to lead which is known to
the state of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65warnings.ca.gov.
WARNING
Cover (5200COV)
Power Supply
(6200CM)
End Cap Kit
(5200END)
Pair
Backplate
(5200BP)
Operator Body
(5230LAP)
Push Arm Pkg
(7701-1)
5231 Push Side Up to 130° opening
Tools Needed
1/4-20
#7
#2
& #3
10"
or 12"
Wire Stripper/
Cutter
#16
12-24
Punch
3/16"
Safety Glasses
3/32"
Ø7/8 Drill
or Hole Saw
Pliers
2.5mm
9/32"
3/8"
Supplied Fasteners and Tools
4x
Operator Body
1/4-20 x 3-3/4"
12x
Backplate &
Forearm Shoe
1/4-20 Machine
Screw
1x
Main Arm
1/4-20 x 1/2"
6x
Power Supply
& End Caps
1/4-20 x 3/8"
3x
Cable
Ties
2x
Forearm Shoe Option
1/4-20 x 5/8" Screw &
1/4-20 x 1-3/4"
Sleeve Nut
3/16"
12x
#14 x 1-3/4"
Self-Tapping Screw
2x
Optional
8-32 x 1/4"
Machine Screw
1x
Cable
Retaining Clip
Optional
AC Power/
Conduit Bracket
(6300CBPC)
To Next Page
Need help?
General
