33
Command Class Basic, Version 2*
* This command class requires security.
This command class is mapped to Door Lock CC:
Table 11 – Basic Mapping Overview
Door Lock Operation Set (Door Lock
Mode)
Basic Report (Current Value = 0x00)
Door Lock Operation Report (Door Lock
Mode = 0x00)
Basic Report (Current Value = 0xFF)
Door Lock Operation Report (Door Lock
Mode > 0x00)
The Basic Get Current Value, Basic Get Duration, and Basic Get Target Value are
mapped to Door Lock Operation Get and Basic Set is directly mapped to Door Lock
Operation Set where the Duration is returned as is, but the Value and Target Door
Lock State Value of the Basic Report use the following mapping:
Table 12 – Basic Report: Value
To Previous Page
Loading...
Need help?
General
