4. Unit operation
PHG 300A / 301A User Manual Page 24 of 40
4.4.3 Ultrasound therapy
Figure 4.8. Screenshot sample view for ultrasound therapy
Symbol Description
1 Area and frequency / Program name
2 Output power / Output power density
3 Presentation of the treatment elapsing time
4 Information field
5 Tab field
4.5 Operation with preset treatment programs and sequences
The simplest method of unit’s operation is to use its preset programs or treatment sequences. The unit includes
a database containing several dozens of most frequently met disorders together with suggested treatment types
and parameters. In this mode, the operation is reduced to selection of disease entity from the list.
The values of the preset treatment programs parameters are based on the available literature data and they
are determined as average values. Parameters should be treated exclusively as indications. Sole responsibility
for application of preset treatment programs bears the User.
Symbol definition and parameter range are specified in the PhysioGo – Technical description manual.
Pressing the button after program / sequence selection results in appearing information which contains:
• technique description of electrodes, ultrasound heads placement and conducting laser irradiation,
• illustrations with highlighted points or areas of the body covered by the treatment,
• suggested number of procedures, the frequency of repetition,
• impact on the patient,
• notes,
• treatment parameters.
To Next Page
