9.10 Tank Level Sensors
Item Description (Quantity) Part Number
Proximity Type
KB30 one sensor 6.6" from tank bottom, (includes a modified tank)
(Must be factory installed in melt tank at time of manufacture)
79233-07
KB50 one sensor 9" from tank bottom, (includes modified tank) 79233-03
KB50 one sensor 7.5" from tank bottom, (includes modified tank) 79233-05
KB50 two sensor 3" and 7" from tank bottom, (includes modified
tank)
79233-06
KB100 one sensor 18" from tank bottom, (includes modified tank) 79233-04
KB100 two sensor 6" and 17" from tank bottom, (includes modified
tank)
79233-02
Spares
Kit, Replacement, 1 Sensor (does not include amplifier or tank) 79263-01
Kit, Replacement, 2 Sensors (does not include amplifier or tank) 79263-02
9.11 Weather-Resistant Housing
Item Description (Quantity) Part Number
Kit, Weather Resistant Housing (30 lb) 79161-1
Kit, Weather Resistant Housing (50 and 100 lb) 79161
9.12 Chassis Fans
Item Description (Quantity) Part Number
Fan Kit, chassis, 230 VAC 79170-2
9.13 Reverse Hose Mounting Kits
Item Description (Quantity) Part Number
Reverse Hose Mounting Kit, 1 hose, 30-100 lb unit, RTD sensor 79188-01
Reverse Hose Mounting Kit, 2 hose, 30-100 lb unit, RTD sensor 79188-02
Reverse Hose Mounting Kit, 1 hose, 30-100 lb unit, capillary sensor 79188-11
Reverse Hose Mounting Kit, 2 hose, 30-100 lb unit, capillary sensor 79188-12
NOTE: 1. One to two feet longer hose may be needed with reverse mounted hoses.
2. Space does not permit more than two rear exit hoses on 50 and 100 lb melt units.
© Copyright Astro Packaging 2009 KB30, KB50 and KB100 Series Hot Melt Units 19600-159 Rev. A 04/09/09 53
To Next Page
Loading...
Need help?
General