ASUNA 5100 - Weekly Maintenance; Monthly Maintenance

Weekly Maintenance:
This maintenance is the upkeep of the overall performance. Check for vibration and
loose parts during this inspection.
Part
Recommended Action
Cleaner
Lubricant
Toe Clips/
Toe Straps
Inspect for wear and tear. Re-tighten if
loose or disconnected. Replace if needed.
N/A
N/A
Hardware
Tighten all the frame hardware (Bolts,
nuts, screws)
N/A
N/A
Adj. Knob
Inspect, clean, lubricate, and tighten all
adjustment knobs
Damp cloth
WD-40 / 3-n-1
Stabilizers
/Foot Pads
Inspect the stabilizers to ensure that they
are not loose. Check foot pads for wear.
N/A
N/A
Bottom
Bracket
Visually inspect to ensure that it is tight
and secure. Re-attach and re-tighten if
needed.
N/A
N/A
Monthly Maintenance:
This maintenance should be comprehensive and should involve checking the overall
frame and main assembly components.
Part
Recommended Action
Cleaner
Lubricant
Resistance
Pads
Inspect & clean the resistance pads.
Remove any foreign material that may
have collected on the pads, check for
damage, replace if needed. (Damaged
pads will affect the balance of bike).
Brush
Non-Abrasive
Silicone
Lubricant
Hardware
(Full
Inspection)
Re-check and secure all hardware
such as: water bottle holders, flywheel
nuts, brake caliper lock nuts, brake
caliper tension rod nuts, handlebar
screws, chain guard screws and nuts
etc.
N/A
N/A
Brake Tension
Rod
Clean and lubricate the brake tension
rod. Inspect equipment for signs of
wear, such as missing threads.
Small Brush
WD-40 / 3-n-1
Seat
Post/Handlebar
Post and Seat
Slider Tube
Clean and lubricate the seat post,
handlebar post, and seat slider tube.
During cleaning, inspect each part for
any build up, foreign material or wear
at the insertion points. Replace parts if
needed.
Small Brush
WD-40 / 3-n-1
Maintenance