3.1 Linux Setup
UPS-EHL01 supports Linux operating systems (see Chapter 1 for specifications). For
instructions on how to install a Linux OS onto your UPS-EHL01, you can find several
guides and tutorials in the wiki section of the UP Board website at https://up-board.org
for both installing supported distributions as well as porting your own Linux build.
3.2 Windows Drivers Installation
Drivers for UPS-EHL01 can be downloaded from the UP Board website by following the
link https://up-board.org and navigating to the Downloads section, then clicking on the
UP Squared V2 to find all relevant drivers.
To Next Page
Loading...
