English
26
All-in-One PC ET2020 Series
Turning your All-in-One PC on
WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug
to the system. Doing so may damage the AC-DC adapter.
Connect the supplied AC adapter to the DC IN jack on the rear panel ( ) and then
press the Power button on the right side ( ) of the All-in-One PC to turn on the system.
NOTE: For details on turning o your All-in-One PC, refer to the section Turning o your All-in-One
PC under Working with Windows® 8.
NOTE:
• The input voltage of the adapter is 100Vac~240Vac.
• It is recommended that the power socket is in close proximity to the All-in-One PC.
To Next Page
Loading...
Need help?
General
