Asus P5E-VM DO - Power Management and Boot Options

ASUS P5E-VM DO 2-35
2.5 Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press <Enter> to display the
conguration options.
2.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Conguration and Power Interface (ACPI) state
to be used for system suspend.
Conguration options: [S1 (POS) Only] [S3 Only] [Auto].
2.5.2 Repost Video on S3 Resume [Disabled]
Allows you enable or disable VGA BIOS POST on S3/STR resume.
Conguration options: [Disabled] [Enabled].
2.5.3 ACPI 2.0 Support [Disabled]
Allows you to enable or disable ACPI 2.0 Support.
Conguration options: [Disabled] [Enabled].
2.5.4 ACPI APIC support [Enabled]
Allows you to enable or disable the Advanced Conguration and Power Interface
(ACPI) support in the Application-Specic Integrated Circuit (ASIC). When set
to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Conguration options: [Disabled] [Enabled].
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [ACPI v1.0]
ACPI APIC support [Enabled]
APM Conguration
Hardware Monitor
Select the ACPI state
used for System
Suspend.