Asus ROG 8 - Disassembly

34 Service Manual
Disassembly
NOTE: Due to dierences in the timing of document released, there
might be slight variations in the appearance or dimensions of certain
parts depicted in the images included in this manual compared to what
is observed on the actual phone. These dierences of the parts will not
aect the equipment repair procedures. Therefore, please proceed with
condence and follow the repair process as indicated in the document.
Caution:
ASUS hereby provides a basic instruction for the disassembly of ASUS
products, i.e. to remove components and materials that require selective
treatments, which are dened by Annex II of the European Union (EU)
Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/
EC. This instruction is intended for the use of end-of-life recyclers or
treatment facilities. Following is the list of Annex II of EU WEEE Directive
2002/96/EC.
- polychlorinated biphenyls (PCB) containing capacitors in accordance
with Council Directive 96/59/EC of 16 September 1996 on the disposal
of polychlorinated biphenyls and polychlorinated terphenyls (PCB/
PCT),
- mercury containing components, such as switches or backlighting
lamps,
- batteries,
- printed circuit boards of mobile phones generally, and of other devices
if the surface of the printed circuit board is greater than 10 square
centimeters,
- toner cartridges, liquid and pasty, as well as color toner,
- plastic containing brominated ame retardants,
- asbestos waste and components which contain asbestos,
- cathode ray tubes,
- chlorouorocarbons (CFC), hydrochlorouorocarbons (HCFC) or