Asus ROG 8 - Diagnostics and Calibration; Important Note

Service Manual 91
Diagnostics and calibration
Important note
After nish repairing the phone, you need to execute the system
calibrations (Audio & Fingerprint) and the SMMI test on the phone to
check whether the phone can function normally. Please visit the below
link of ASUS ocial Support Site to obtain the software tools and SOP:
1. Audio Calibration (execute when dismantling/reassembling the
phone);
2. Fingerprint Calibration (execute only when the LCD panel or the
motherboard is replaced);
3. SMMI Test (execute when dismantling/reassembling the phone).
https://rog.asus.com/phones/rog-phone-8/helpdesk_manual/
4. ASUS Self Replacement Solution Page (to be executed only when
the motherboard is replaced): Update Warranty Coverage
After successfully installing your new motherboard and
completing all parts removal and reassembly steps, the unit’s
serial number is updated to a new one to ensure the application
of the new security certicate. Before proceeding, we highly
recommend recording the original serial number. Once you’ve
nished the entire component replacement procedure, please
visit the ASUS Self Replacement solution Page (https://
selfreplacementsolution.asus.com:8090/R2RMbWeb/login) to
input both the original serial number and the new serial number
associated with the replaced motherboard. This step is essential
for maintaining the continuity of your warranty coverage.