Service Manual
5
Disclaimer
ASUS is not responsible for direct, indirect, intentional or unintentional
damages resulting from improper installation and operation.
Safety notices
• Keep liquids or moisture away from your ROG Phone before
installing or removing any components.
• Ensure to place your ROG Phone on a stable surface before
installing or removing any components.
• Detach the clip or ap before removing the signal cables to
prevent damage.
• Disconnect the power plug by pulling the plug evenly to avoid
damage. Ensure to connect the signal cables in the correct
orientation.
• Disconnect all power cables and remove the battery pack (if
applicable) before cleaning your ROG Phone with liquid detergent
to avoid risk of electric shock.
• Disconnect all power cables and remove the battery pack (if
applicable) before installing or removing any components. Ensure
to read and follow the instructions in the manual.
• Before handling components, use a grounded wrist strap or touch
a safely grounded object to avoid damaging them due to static
electricity.
• Keep liquids or moisture away from your ROG Phone to avoid
short circuits.
CAUTION: The product (including its functionality and water resistance),
parts, and other properties may be damaged or compromised if you fail to
adhere to the manual or to use genuine ASUS parts and correct tools. Please
note that the product’s water resistance is not guaranteed if it is repaired
by someone without the necessary skills. For a thorough water resistance
check, please visit an authorized ASUS Service Center.
To Next Page
Loading...
