Asus ROG GR6 - ROG GR6 Powering Off; ROG GR6 Entering BIOS Setup

26
GR6
Turning off your ROG GR6
Click Shutdown in Windows® operating system or press the
Power button to shut down your ROG GR6. If your ROG GR6 is
unresponsive, press and hold the power button for at least four (4)
seconds until your ROG GR6 turns o.
Putting your ROG GR6 to sleep
Click sleep in Windows® operating system to let your ROG GR6 enter
sleep state.
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware
settings that are needed for system startup in the ROG GR6.
In normal circumstances, the default BIOS settings apply to most
conditions to ensure optimal performance. Do not change the
default BIOS settings except in the following circumstances:
• Anerrormessageappearsonthescreenduringthesystem
bootup and requests you to run the BIOS Setup.
• Youhaveinstalledanewsystemcomponentthatrequiresfurther
BIOS settings or update.
WARNING! Inappropriate BIOS settings may result to instability
or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.