GR6
35
Installing a 2.5-inch storage drive
The ROG GR6 supports one 2.5-inch HDD or one 2.5-inch SSD for
additional storage capacity.
To install a 2.5-inch HDD or SSD:
1. Turn o your ROG GR6.
2. Disconnect all cables and peripherals.
3. Place the ROG GR6 on its side on a stable and at surface.
4. Press down the latch at the rear panel to unlock the side cover.
NOTE: Before you remove the side cover, ensure that the UNLOCK
label on the latch is visible.
To Next Page
Loading...
