Asus WS C621E SAGE Series - Advanced Power Management Configuration

3-16
Chapter 3: BIOS Setup
Chapter 3
3.7.6 Advanced Power Management Configuration
This menu displays and provides options to change the Power Management Settings.
CPU P State Control
Boot performance mode
Allows you to switch between Boot performance mode.
Congurationoptions:[MaxPerformance][MaxEfcient][SetbyIntelNodeManager]
Energy Efficient Turbo
AllowsyoutoenableordisableEnergyEfcientTurbo.
Congurationoptions:[Disabled][Enabled]
Turbo Mode
Allows you to enable or disable Turbo Mode.
Congurationoptions:[Disabled][Enabled]
Hardware PM State Control
Hardware P-States
Allows you to switch between Hardware P-States mode.
Congurationoptions:[Disabled][NativeMode][OutofBandMode]
[NativeModewithnoLegacySupport]
CPU C State Control
CPU C6 Report
Allows you to select CPU C6 Report.
Congurationoptions:[Disabled][Enabled][Auto]
OS ACPI Cx
Allows you to select OS ACPI Cx Report.
Congurationoptions:[ACPIC2][ACPIC3]
Package C State Control
Package C State
AllowsyoutoselectPackageCState.
Congurationoptions:[C0/C1state][C2state][C6(nonRetentionstate)]
[C6(Retentionstate)][NoLimit][Auto]
CPU Thermal Management
CPU T State Control
Software Controlled T-States
Allows you to enable or disable Software Controlled T-States.
Congurationoptions:[Disabled][Enabled]
CPU - Advanced PM Tuning
Energy Perf BIAS
Power Performance Tuning
Congurationoptions:[OSControlsEPB][BIOSControlsEPB]