Asystems NT2508 - Introduction; Features

2
NT2508 / NT2504 / NT1308 / NT1304 / NT4004
English
1. INTRODUCTION
Congratulations on your purchase of a NT series network amplier. The NT’s exible deisgn will provide you with up to
eight channels of audio with advanced DSP processing. A single NT amplier o󰀨ers eight-in, eight-out support (or four-in,
four-out), and the entire system can be controlled through standard potentiometers or exible remote software. Internal
processing is accomplished through a high quality 40-bit oating point processor, with internal signal processors and
routing all handled with ease�
NT series digital network ampliers o󰀨er easy, e󰀨ective means for injecting signal processors directly into your input
and output path, with clear, easy-to-use software both onboard and on your Windows computer. The software o󰀨ers full
performance monitoring for each processor, giving real-time information on the load placed upon DSPs�
2. FEATURES
● 4 or 8 input channels available via 3-pin Euroblock connections
● Built-in multi-channel amplifier for low-impedance or line distribution application*
● Amplifier provides up to 250 Watts of power per channel (exact output can be found in specs)
● 4x4 or 8x8 matrix routing input channels to any output channel
● 40-bit floating point processor with internal sampling selectable between 44.1 and 48 kHz
● 4x4 or 8x8 networking capabilities through audio streaming LAN card (sold separately)
● Ethernet connectivity for network and internet control application
● Automatic DHCP network IP configuration
● Easy and intuitive control software from Asystems
● 4-band parametric equalizers can be assigned to all inputs
● Adjustable compressors and limiters built-in
● Delay time can be adjusted in meters, feet or milliseconds
● User-dened crossovers available on output channels
*Operating mode is dependent on purchased model.