Atag MC4111L - 6 The Different Components

MC4111L / MAG 690
Technische documentatie
6 - THE DIFFERENT COMPONENTS
Designation Function Characteristics
Metallic grid
In grill function, it makes it possible to
brown food.
In Fan cooking: To pose the dishes on the
grid in low position to obtain a better
distribution of heat and optimal of cooking
results.
The glass drip tray It can be used half filled of water for
cooking with the “bain-marie” in fan
cooking function or as cooking dish.
The side racks
The side racks make it possible to insert
the accessories on 3 levels.
The 3 levels of insertions are available
according to the type of food cooking.
• Two ceramic supports located of
each side of the cavity are used to hang
the racks.
• Two Teflon pieces located in bottom
of the racks avoid contacts with cavity.
The turntable
It makes it possible to homogenise
cooking.
• Diameter : 360 mm
• 4,2 t/min (1 motor speed)
The drive system
Allows the turntable to turn in the two
directions :
- A driver
- A base roller
The unit allows an easy starting of the
plate.
The wheels of the roller are in Teflon.
They are assembled free on their axe.
The turntable only is in contact with the
wheel, to reduce frictions.The free
assembled plastic base plate is aligned
by gravity.
• Possibility to clean in the dishwasher
safe.