EasyManua.ls Logo

Atag MX4211AUU - Using Speed Defrost Mode; Setting Speed Defrost Mode

Atag MX4211AUU
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Using Speed Defrost Mode
Setting Speed Defrost Mode
Choose from ve pre - programmed microwave settings for defrosting. Defrosting time and
power level are automatically set. Simply select the setting and weight to start defrosting.
Open the door. Place the frozen food in the centre of the ceramic tray. Position is
level 1. Close the door.
Turn MODE SELECTOR to the Speed
Defrost ( ) symbol.
Turn MULTI-FUNCTION SELECTOR
to choose desired defrost item. Press
WEIGHT/MICROWAVE POWER to
set desired defrost item. (Refer to
table on page 29 for a description of
the 5 Speed Defrost settings.)
Select the food weight by turning the
MULTI-FUNCTION SELECTOR.
Press START to start cooking.
When cooking has nished, the oven will beep and ash “End” four times. The oven will then
beep once every minute for 3 minutes.
Result Defrosting begins.
The oven beeps half way through defrosting to remind you to turn the food over.
Important
Use only containers that are microwave - safe.
You can also defrost food manually. To do so, select the microwave Cooking / Reheating
function with a power level of 180 W. Refer to the section entitled “Cooking / Reheating” on
page 38-39 for further details.
1 2
3 4
MX4211AUU_A01-03208V_EN.indd 28 2009-12-25  1:02:25

Related product manuals