(1) Preparation of refractometer13
(2) Connection with circulating constant temperature bath15
Contents
1
Page
Precautions for use2
Refractive Index and Brix8
Unpacking and Setting-up9
Names and Functions of main parts
Power-on17
Calibration (Scale adjustment)
Finding average dispersion value and Abbe number37
Cleaning and maintenance42
Replacement of consumable supplies and component parts
(Simultaneous analysis of insoluble solids, sugar and water)
(1) Measuring glass, plastic samples25
(2) Measuring film samples28
(3) Measuring of double refraction samples30
Preparation for measurement
12.
13.
14.
6.
7.
1.
2.
3.
4.
5.
(1) Main unit of NAR-2T 10
(2) Digital thermometer12
(3) How to use Illuminator Selector Switch12
Measurement of liquid sample238.
(1) When measuring colored or cloudy sample35
(2) Discoloration or "Burning" of the main Prism35
(3) Measurement method of pasty sample35
(4) For measuring liquid sample containing insoluble solids36
Measurement of solid sample
9.
(1) Calibration with distilled water18
(2) Calibration with test piece20
Measurement of powdered sample3310.
Situations that may require additional attention
11.
Relation between Brix percent and Refractive Index (nD)49
Temperature correction table for sucrose solution50
Specifications 51
Repair and warranty52
ATAGO CO.,LTD. Service Center53
15.
16.
17.
18.
19.
(1) Prism 44
(2) LED lamp46
(3) Thermo-sensor unit47
(4) Desiccant48